Diff question

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Mr.SWISS
    replied
    Is there a chart somewhere that shows all the ratios and what models they are found in?

    Leave a comment:


  • AdamF 88iS
    replied
    Originally posted by nando
    how about the M couple and MZ3 roadster? I know the cover works but I have no idea on the diff.
    Its the exact same housing. Flanges may need to be swapped around.

    Leave a comment:


  • nando
    replied
    how about the M couple and MZ3 roadster? I know the cover works but I have no idea on the diff.

    Leave a comment:


  • AdamF 88iS
    replied
    Originally posted by Mr.SWISS
    So the e28 535is diff will NOT work?
    Have to swap the rear cover and output flanges. The main case is the same though.

    Leave a comment:


  • Mr.SWISS
    replied
    So the e28 535is diff will NOT work?

    Leave a comment:


  • crazynoll
    replied
    Originally posted by joshh
    It was a factory option. If the casing has a white painted "S" on it then yes....or the tag has an S then the gearing numbers for the diff.
    ok thanks

    Leave a comment:


  • joshh
    replied
    Originally posted by crazynoll
    does anyone know if an 86 325e has LSD?
    It was a factory option. If the casing has a white painted "S" on it then yes....or the tag has an S then the gearing numbers for the diff.

    Leave a comment:


  • AdamF 88iS
    replied
    Originally posted by Rocla
    and
    E34 very early m20 powered ones.

    E28, E24 and E34 have type 188(=medium= e30 "big") case and will require e30 drive flanges and back cover.

    I don't know about z's and ti's.
    E34s don't used the same case. If you're talking strictly 188 gear sets, then you can use damn near any BMW diff.

    Leave a comment:


  • euro3
    replied
    E28's

    M30 powered E28's had the large type (210mm).

    I'm pretty sure E34's have the large as well.

    And, since E24's were powered by M30 I'm guessing they also have the large case

    Leave a comment:


  • crazynoll
    replied
    does anyone know if an 86 325e has LSD?

    Leave a comment:


  • Rocla
    replied
    Originally posted by AdamF 88iS
    You can use small and medium case diffs from

    E24 (non-M)
    E28 (non-M)
    E30
    E36- TI or Z3 only.
    and
    E34 very early m20 powered ones.

    E28, E24 and E34 have type 188(=medium= e30 "big") case and will require e30 drive flanges and back cover.

    I don't know about z's and ti's.

    Leave a comment:


  • AdamF 88iS
    replied
    You can use small and medium case diffs from

    E24 (non-M)
    E28 (non-M)
    E30
    E36- TI or Z3 only.

    If you're tricky you can swap gear sets from E32s, E34s, E36s, and others... the guts are the same but the housings are totally different.

    Leave a comment:


  • blueapplesoda
    replied
    sweet thanks

    Leave a comment:


  • erik325i
    replied
    Originally posted by blueapplesoda
    will any diff from any bmw work in e30s by swapping the rear cover? or am i mistaken.
    no, you are mistaken. There are only certain cars that have e30 compatible diffs. You can use the diff from e30s, Z3s, 5-series [I think the e28], probably the 318ti, and I think even the e24 (this one may be wrong). You will need to swap the cover and output flanges in order to use most of these though.

    -Erik

    Leave a comment:


  • Brew
    replied
    Originally posted by MikeE30325i
    You Are Mistaken. There Are Small, Medium, And Large Cases. But Everyone I Hear Anything From Is Mixed, Some Say It Fits, But Others Say It Wont. I Am Not Too Sure
    Maybe you shouldn't post then.

    There are two "sizes" of diffs that will fit e30's. The "small" case diffs that came in 318s, and the "medium" case diffs that came in the I6 e30, the e30 M3, and e28s. Here's a decent link: http://www.e30eta.com/ecdiff.htm

    Leave a comment:

Working...