Announcement

Collapse
No announcement yet.

parts lilst for tranny

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    parts lilst for tranny

    In the near future I am planning in replacing my 5-speed for another 5-speed. I have never done this before and want to know what parts i should replace (including seals) when the transmission is off. Also the car has a slight oil leak, would that be the rear main seal?

    Parts List

    1.) clutch Kit
    2.) pilot bearing
    3.) Throw-out bearing
    4.) rear main seal?

    What size torx sockets do i need?

    Any other special tools?

    i read in the bentley that MICRO LUBE GL 261 needs to be used in the input shaft for reinstallation? Where can i get this?

    Any help is appreciated. thanks Matt

    #2
    i believe it is a 10 and a 12 torx
    Dan Zickel
    1995 M3, 1991 318iS, 1987 325iS

    Comment


      #3
      output shaft seal, input shaft seal, selector rod seal.


      http://www.cardomain.com/ride/657387

      Comment


        #4
        LOTS OF PATIENCE! Small hands help as well. Lots of extensions. Mostly patience.
        sigpic
        Been over a year and it still doesn't the other motor mount made...

        Comment


          #5
          Oh, and you don't really need the input shaft grease. Just think about it. Clutch disc, liquid... not a good combo...
          sigpic
          Been over a year and it still doesn't the other motor mount made...

          Comment


            #6
            cool... any other helpful hints?

            Comment

            Working...
            X