need confirmation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • urbancynic
    Grease Monkey
    • Dec 2008
    • 384

    #1

    need confirmation

    I went to get in my car today and discovered that my clutch pedal was on the floor. I checked the fluid reservoir and found it to be empty with a puddle under the left of the car. the carpet inside was bone dry. I believe it to be the clutch slave cylinder since the brakes (from what i was told) are still pretty solid. Am i right or am i wrong?

    I didnt have a chance to look at it because I had to play driver for my gf because she hates driving 45 miles one way to see her mom.

    If im right, should i do the clutch master aswell? Also, how hard of a job is this to do? I have a bentley manual, but not in my posession atm. Ive never had to do anything with a hydraulic clutch before, only replaced clutch cables on volkswagens. :roll:

    Thankyou for your help.
  • Liam
    Mod Crazy
    • Mar 2009
    • 753

    #2
    Slave cylinder is a really good bet.

    The master is a little bit of a bitch.
    I'm Not Right in the Head | Random Rants and other Nonsense1st Order Logic Failure: Association fallacy, this type of fallacy can be expressed as (∃xS : φ(x)) → (∀xS : φ(x)), meaning "if there exists any x in the set S so that a property φ is true for x, then for all x in S the property φ must be true".

    Comment

    • urbancynic
      Grease Monkey
      • Dec 2008
      • 384

      #3
      thanks for the info. I looked at it and the interior of the car seems dry to me, and under the car near the transmission has a little puddle and a bunch of fluid spray on the left of the transmission and the surrounding area. my bet is the slave. but how likely is it that the hose needs to be changed too?

      Comment

      • accident
        R3V OG
        • Sep 2008
        • 7303

        #4
        hopefully the fluid didnt go into the bellhousing. my slave popped and dumped fluid all over the clutch, ruining it. had to replace it

        Originally posted by ROLLingKING
        i have a bronzit and plan on making it look sweet.
        Originally posted by slammin.e28
        Moral of this story?

        If you drive your e30 on stairs, you're gonna have a bad time.

        Comment

        • urbancynic
          Grease Monkey
          • Dec 2008
          • 384

          #5
          i hope to God that didnt happen. ut looks like itd be a pain in the ass to replace the clutch in my driveway

          Comment

          • Beach Bum
            E30 Addict
            • Feb 2009
            • 466

            #6
            Hope you can bench press a transmission...
            Originally posted by george graves
            If people keep quoting me in their sig, I'm going to burn this motherfucker down.

            Comment

            • rThor432
              No R3VLimiter
              • Feb 2007
              • 3907

              #7
              ^^All 70 pounds of it.

              Comment

              • urbancynic
                Grease Monkey
                • Dec 2008
                • 384

                #8
                its repaired and driving better than before. that was not a fun job though. i think id almost rather hit myself in the testicles with a hammer than do that again any time soon.

                Comment

                • Doughnut
                  E30 Modder
                  • Oct 2007
                  • 869

                  #9
                  Originally posted by urbancynic
                  i think id almost rather hit myself in the testicles with a hammer than do that again any time soon.
                  Um, ouch....

                  So what was it? the slave and the clutch? Or just the slave?
                  ///Monstrosity. (OO≡≡[][]≡≡OO)

                  Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.

                  Comment

                  • urbancynic
                    Grease Monkey
                    • Dec 2008
                    • 384

                    #10
                    it was just the slave. the clutch was fine. i replaced the master and the hose between the master and slave just to be safe tho.

                    Comment

                    Working...