can i use the stock e30 booster or do i need to swap it out?
???? brake booster question?????
Collapse
X
-
1974.5 Jensen Healey : 2003 330i/5Comment
-
Here's a link that may help you out.
Read it from start to finish and you should have a good idea of how much work goes into the V8 swap.Comment
-
This link is quite good and very detailed. Pretty accurate representation of the swap and the work necessary to do it.Here's a link that may help you out.
Read it from start to finish and you should have a good idea of how much work goes into the V8 swap.Originally posted by csermonet47Vlad, you are handling this quite unprofessionally.
Also, you are a cock with tacky taste.
That is all.Comment
-
There is a guy in Europe that is putting an S62 in his E30 and is using a hydro setup, but the head/VC are slightly different on the S62 than the M6x V8, so for him it works. But he also moved the entire setup over about ~3 inches... I think he has a post in this section. I'll look for it and link it...
Garey
EDIT: Here it is... http://www.r3vlimited.com/board/showthread.php?t=208279

Comment
-
I picked up an H31 hydro-boost setup from a guy on CL, just to check it out. I don't think it really makes the brake problem with these swaps much easier. Once you get done with the firewall and pedal-box mods/fab, you still have clearance issues with the reservoir, and the brake lines going to the master - and the whole shittery is getting baked by the driver-side exhaust manifold.
Not a slam dunk, by any means.
-BruceComment
-
I know... I know you did a pretty slick mod in yours, Bruce and that's also why I went with the Wilwood pedal assy in mine. It is a mess of an area to have all that hardware in and getting baked to boot!I picked up an H31 hydro-boost setup from a guy on CL, just to check it out. I don't think it really makes the brake problem with these swaps much easier. Once you get done with the firewall and pedal-box mods/fab, you still have clearance issues with the reservoir, and the brake lines going to the master - and the whole shittery is getting baked by the driver-side exhaust manifold.
Not a slam dunk, by any means.
-Bruce
Garey

Comment
-
Thread steal!
Anyone got the e34/e32 booster+bracket for sale?
And one related question.. Is it possible to use the stock 325 MC with it?Comment
-
Shipping to Iceland would be bank! I have an e34 booster/mc with all the hardware and I think I have a spare e30 MC so I'll try and check that for you to answer your question on fitment.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment


Comment