Announcement

Collapse
No announcement yet.

Dimensions for motor mount pads and...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dimensions for motor mount pads and...

    Hi All,

    I was wondering what the dimension(s) is/are for the M60 with motor mounts for an E30 from center of bottom hole in motor mount arm (where the rubber mount bolts in) to opposite hole? in other words, the width across the arms where the rubber mounts bolt to.

    On a stock setup, they are close to 20".

    Also, what is the distance between the mounting holes on the subframe in the E30?

    My swap is not going into an E30, but I was wondering how close they are to my car, as I would rather buy the mounts since they're available (if they'll work).

    Clear as mud?

    Thanks!

    #2
    We may be able to get a measurement of our mounts to help you out. So you need the distance across the mounts (from mounting arm to mounting arm). It this correct? If so we have an m62 here that we can put some of our e30 m60 arms on and take a measurement across.

    Let us know if this is what you need.

    Who knows, maybe are mounts will work for your conversion. ;)

    Comment

    Working...
    X