procharged ls6 e30

[blusylver]

If i went this route i would add some more caging currently the car caged but only up to the strut towers.

with running air to air I can mount vertically or horizontally correct? i dont see why i couldnt, i just have never seen it done before. (in a car)

ill have to look when i get home, maybe i can just have a radiator built that will fit into the core support section with out having to cut it apart.

[e30_302]

or just completely cut apart the core support, and put the radiator in front of the intercooler.

I can't say with certainty, but I'm fairly sure that added to some fairly significant front end flex I experienced on track. At any rate, I plan on using some scrap roll bar tubing to tie the front back together.

[blusylver]

yep that my issue, its tight with just the stock pulley. i might have to go with multiple smaller radiators. or just completely cut apart the core support, and put the radiator in front of the intercooler.

[jalopi]

From what I've seen you'll probably run into issues with the pulley/belt hitting the radiator. How wide is the pulley for the supercharger?

[blusylver]

has anyone seen or done this yet? I cant imagine that I would be the first, but i have yet to see anything like this. Im beginning to run into some fitment issues and i want to see what other people have done.