If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Another thought is you can connect an OBD scanner and make sure the PCM is on and sensors are reading appropriately. You did wire in an OBD port...right?
I think the next logical step would be able to pull the injectors still on the rail and have them sraying onto something and see if fuel is actually making it into the cylinder
I just don't understand. All 8 were spraying fine a month ago.... Now neither would spray? I mean what are the odds of that after the motor has been out for a year and some change that the injectors fail now.
dude i don't understand it at all. checked spark. yes.
checked fuel. yes
jumped the starter fuel was coming out
but it wouldn't turn on.
i'm shocked too man
Reyhan you said you checked fuel. So honestly if you are sure you have spark...just spray some damn starting fluid in the intake and see if it fires. If it does you have no fuel....
Comment