5.3 LSA build

[Supadave]

It does a better job of keeping heat out of the engine bay.

[iansane]

20190105_122951 by Supa Khan, on Flickr

20190106_000825 by Supa Khan, on Flickr

Was there a reason you chose shielding like that instead of a good ceramic coat?

[Supadave]

Exhaust is here. Dual oval 3" all the way back to a Magnaflow muffler and dual cut outs.

20190112_184205 by Supa Khan, on Flickr

20190112_184232 by Supa Khan, on Flickr

20190112_184219 by Supa Khan, on Flickr

[Supadave]

Spent some time today installing and mocking up the sequential shifeter

20190112_183623 by Supa Khan, on Flickr

20190112_182502 by Supa Khan, on Flickr
20190112_182411 by Supa Khan, on Flickr

[HawaiianE30]

Looks wicked, taking notes for sure

[Supadave]

Man you are going to have to roll/beat the hell out the rear fenders to make those fit. They look good though

Nothing a heat gun and a roller cant fix. I was surprise on how well they fit. A lot people told me it wouldn't work, but it really doesn't need that much rolling to work.

[Pootis]

Man you are going to have to roll/beat the hell out the rear fenders to make those fit. They look good though

[Supadave]

Update

20190105_122935 by Supa Khan, on Flickr

20190105_122951 by Supa Khan, on Flickr

20190106_000825 by Supa Khan, on Flickr

Got some new tires. Toyo R888 R. Rear 245/45/16 on a 16x9 ET10. Front 205/50/16 on a 16x7.5 et20.

Before

20181224_180126 by Supa Khan, on Flickr

20190108_150938 by Supa Khan, on Flickr

After


20190108_160857 by Supa Khan, on Flickr
20190108_171933 by Supa Khan, on Flickr

20190108_171937 by Supa Khan, on Flickr

20190108_171945 by Supa Khan, on Flickr

[Supadave]

Holy hell dude... I put together my swap list and been dreaming about it for the last year but this is just something else. Do you have a specific class your building for or just looking to build a monster for the heck of it?

Just building. Kinda like a dream build for me

[HawaiianE30]

Holy hell dude... I put together my swap list and been dreaming about it for the last year but this is just something else. Do you have a specific class your building for or just looking to build a monster for the heck of it?

[Supadave]

Screenshot_20181218-153259_Tiny Scanner by Supa Khan, on Flickr

So the more I look at this, the more I think I should just ground the BK/GN wire...

[Pootis]

Let me look at mine I had the same issue

[Supadave]

OK, I think I got it figured out. I'm going to tie the black/green (pin 15 C101) wire into the black/yellow (pin 18 C101) wire. This should unload relays K5 & K7 during START.

[Supadave]

Question

The Black/Green wire that normally goes to terminal 30h on the BMW starter, where does this go on the LS swap? Does this go to chassis ground now?

[sgtskid]

Looking Good!

I remember seeing those sequential gear shifters when they were advertising at SEMA last year. That would be so much fun!