So close!
PO didn't even bother to retrofit a clutch switch and after a few day of looking for the proper hardware for a 1988is I realized that the pedal box was not FROM an 88is.
Made a bracket to hold the clutch switch. It is actuating as it should.
Went through the wiki installations as if I was doing this from scratch and I find the only thing that doesn't like up with that instruction or the Bentley is I am not getting a good ground at terminal "9" at the cruise plug.
I do get 12v with ignition on at "1" and "23".
I know "9" goes to the brake lights but not sure how to proceed.
Brakes lights work fine.
Seems everything else is in order.
PO didn't even bother to retrofit a clutch switch and after a few day of looking for the proper hardware for a 1988is I realized that the pedal box was not FROM an 88is.
Made a bracket to hold the clutch switch. It is actuating as it should.
Went through the wiki installations as if I was doing this from scratch and I find the only thing that doesn't like up with that instruction or the Bentley is I am not getting a good ground at terminal "9" at the cruise plug.
I do get 12v with ignition on at "1" and "23".
I know "9" goes to the brake lights but not sure how to proceed.
Brakes lights work fine.
Seems everything else is in order.
Comment