My compressor is not getting power. I have by-passed the pressure switch. I have tested the a/c switch and it is not working properly. If I hold it in there is continuity where there should be, but if I just push it in, there is continuity and then there is none. I have to physically hold it in place to keep continuity. The area of the switch that is giving trouble, goes to the evaporator temp switch. Where is that?
-
-
The temp switch is mounted to the compressor, be carefull removing it as it will twist up the wires a little.
Part #5:
GL!///Monstrosity. (OO≡≡[][]≡≡OO)
Aside from showing yourself to be offensive, lacking experience and ignorant in the ways of business, you're also illiterate and imprudent. Beyond that, your sense of liability is severely impaired.
-
Thanks. My compressor is not turning on. It will turn on if I jump the 12v directly to it. But when I hit the switch in the car, there is not 12v at the compressor. I have bypassed the high low switch and that did not do it either. Any idea how to check this switch or bypass it? I just want to make sure that the evaporator temp switch is not the problem. ThanksComment
-
Do you just have a bad a/c switch on the dashboard?Comment
-
I am not sure, I am getting a used working one to make sure.Comment
-
ok, I may have named the part wrong, it is not a switch, it is a sensor. Where is the evaporator temperature sensor?Comment
-
It's in the ac/heater box, IIRC on the drivers side.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
-
Any pics of that?Comment
-
Anybody have a pic of this thing. I can't find it. Thanks.Comment
-
Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827Comment
Comment