I just swapped the starter on my '88 iX, and now the K5 and K7 unloader relays are not engaging when I turn the car on. With the car off, pin 30 is hot. With the car on, pins 30, 85, and 86 are hot. If I jumper pin 30 to pin 87, the windows and blower work, so I am sure that the problem is in the power box. I have switched the actual relays, so I know that is not the problem.
I have been told that there is a wire on the starter that I may have missed, but as far as I can see they are all connected. Any more guidance on connections to check (and their specific locations) or how the relay pins should test out would be appreciated.
I have been told that there is a wire on the starter that I may have missed, but as far as I can see they are all connected. Any more guidance on connections to check (and their specific locations) or how the relay pins should test out would be appreciated.
Comment