Announcement

Collapse
No announcement yet.

Hello All ! Need some help with 85 318i

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hello All ! Need some help with 85 318i

    The car starts and runs good until you hit the gas and the RPM's go past 3500
    Then it just quits?????
    If you feather the gas pedel it will run BUT very sick!

    HELP!

    :shock:

    #2
    How long has it been since you've replaced:
    -Distributer Cap
    -Rotor
    -Ignition Wires
    -Spark Plugs
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment


      #3
      Do what Ken said. Also, look at fuel filter.

      How does it drive?

      Comment


        #4
        If those don't work, there's a good chance its the Air Flow Meter. The board that the arm sweeps across as the flap opens wears out after a while. Mine had a definite stumble around that RPM until I got a remanufactured one.

        Also chek the vacuum advance. I'd do that first since it doesn't cost anything to check.
        sigpic

        Comment


          #5
          Its good to know all the things that make em fall!
          So thanks
          It was the fuel pressure reg.
          Cheers

          Comment


            #6
            I second that... I think the afm is suspect..

            Comment


              #7
              Originally posted by kencopperwheat
              How long has it been since you've replaced:
              -Distributer Cap
              -Rotor
              -Ignition Wires
              -Spark Plugs

              Learned your lesson after the distributer cap indicent
              I did the same thing with mine. I went to replace my cap and rotor last summer and both were about destroyed. Replacing them made a world of difference.


              Nick

              Comment

              Working...
              X