Announcement

Collapse
No announcement yet.

Starter Wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by jlevie View Post
    The fuel pump is controlled by the DME and only runs when the DME sees timing data from a rotating engine. The pump doesn't run just because the ignition is switched on.
    So, crank engine for a small amount of time and listen then, correct?

    Comment


      #17
      You have to listen, or better yet monitor rail fuel pressure, while the engine is cranking
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment


        #18
        Originally posted by jlevie View Post
        You have to listen, or better yet monitor rail fuel pressure, while the engine is cranking
        OK, did this and the fuel pump is definitely not running.

        SO, I have no fuel and no spark.

        Comment

        Working...
        X