Are these holes normal? I knew I was getting more engine noise than I should be. especialy above 2k. It sounds like noisy tapping injectors.
Attached Files
-
90 m20is -
Yes. Those holes are supposed to have plastic grommets in them in an automatic car.
The top hole is for the clutch master cylinder soft line from the brake fluid reservoir, and the bottom hole is for the clutch master cylinder output.
-
That is NOT supposed to be there, but I cannot remember what is.
I am in Redmond tonight, you are welcome to call me and stop by (520 and Redmond Way) but I am off to Fatburger for some grub.
four two five-seven six one-six four five one
Luke
Closing SOON!"LAST CHANCE FOR G.A.S." DEAL IS ON NOW
Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398
Thanks for 10 years of fun!Comment
-
Luke is that a bogus #90 m20isComment
-
So now on to filling them. Eventually going to an s50 with a manual swap. Whats the best tranny for the job and what master cylinder should pair with that.90 m20isComment
-
Use the E30 master cylinder. I'd get a ZF310 or 320 from a 95M3, 96+ 328i, or 96+M3.Comment
-
Right on, thanks for the info.90 m20isComment
Comment