shifter issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • alpinee30m50
    Mod Crazy
    • Mar 2009
    • 647

    #1

    shifter issues

    I have a short shifter on my g260 with bronze bushings, and its short as hell. It was all fine until yesterday when i shifted into 3rd and the shifter popped up. It still shifts fine, but it has an inch or two of vertical play. It was put in when i finished my swap last month. What the hell happened?


    86 Zinno es
    M50 inside
  • lennon
    E30 Fanatic
    • Jun 2008
    • 1416

    #2
    pull up the boot and/or get under the car and look? im guessing the problem will be easy to spot

    Comment

    • HarryPotter
      No R3VLimiter
      • Jan 2010
      • 3642

      #3
      If it's using the early model shift plate type deal one of the bushings on the plate might have broke causing the vertical play. Take the boot off and check it out.


      "Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."

      John F. Kennedy

      Comment

      • alpinee30m50
        Mod Crazy
        • Mar 2009
        • 647

        #4
        yeah im doing that tomorrow i havent had time lately


        86 Zinno es
        M50 inside

        Comment

        • whiltebeitel
          R3VLimited
          • Apr 2007
          • 2098

          #5
          The rear mount is loose. It's about 6" behind the shifter in the trans tunnel.
          '89 325i track sloot
          '01 530i daily

          -Enginerd

          Comment

          • BlackBMWs
            Noobie
            • Aug 2009
            • 12

            #6
            Perhaps the Nylon shifter cup the shifter sits in wasn't fully snapped in. (if you are using the nylon cup) There are two ears that fit into two corresponding slots that lock it in place. If they wern't locked in, the shifter would move upward.

            If that's the case, you can probably pull the leather and rubber boots up and get the shifter and cup back in-place from the interior.

            Good luck!

            1999 540it - Jet Black/Sand Beige
            1998 318ti - Schwartz/Anthraz
            1997 318ti - Schwartz/Anthraz
            1995 318ti - Alpineweib/Schwartz
            1994 325i - Bostongrau/Sand
            1991 318ic - Schwarz/Anthratz Stoff

            BMWCCA# 160411

            Comment

            • jeffw
              E30 Enthusiast
              • Sep 2008
              • 1087

              #7
              early or late model shift carrier? big difference on what the problems could be between the two

              Comment

              • alpinee30m50
                Mod Crazy
                • Mar 2009
                • 647

                #8
                its an early model, 86 getrag 260


                86 Zinno es
                M50 inside

                Comment

                • bddog
                  Grease Monkey
                  • Feb 2004
                  • 351

                  #9
                  And by the by, never keep your hand on the shifter while driving.

                  Comment

                  • HST
                    Mod Crazy
                    • Jan 2006
                    • 757

                    #10
                    Sounds like the ball can out of the cup to me.
                    Originally posted by KingB
                    Scratch my back and I buy a prostitute for you, to rub your balls. HAHA now thats some funny shit.

                    Comment

                    • MattM
                      E30 Modder
                      • Apr 2009
                      • 931

                      #11
                      yup, check the rear rubber mount, its probably either in 2 peices(cheap to replace) or its worn enough that it poped out of its hole in the plate


                      Full Build Thread Here

                      Comment

                      Working...