Can I get a pic of how the verts trunk is held up

[87-325ic]

just get some pins and a shock and weld it on. late model verts use two shocks, two weaker ones.

[NC325iC]

the lower mount is on the thing that holds the jack in place. the upper mount is on the hinge. you could drill a hole and use bolts with a lock nut, or you could weld the little pins in place. i dont remember what the trunk hinge looks like in a coupe or sedan, so i don t know if those pins are there for you already.

its differnt

[McGyver]

the lower mount is on the thing that holds the jack in place. the upper mount is on the hinge. you could drill a hole and use bolts with a lock nut, or you could weld the little pins in place. i dont remember what the trunk hinge looks like in a coupe or sedan, so i don t know if those pins are there for you already.

[NC325iC]

the hinges are i believe, your problem would be with the lower strut mount i think

[reelop19]

Thanks dude. Hey are these parts interchangeable to a coupe?

[McGyver]

[McGyver]

pins on the lid and body in the left side of the trunk go through the holes on each end of the shock and then a little washer slides over the end of the pin to hold the shock in place.

[reelop19]

I have a coupe and had to remove the springs for my stereo install and need to see how the convertibles have they're trunks held up. Thanks