If i were to put new cams and bigger injectors in the m50 would i need a programmable chip or standalone to run it? Or can you tune the stock motronic system? I know nothing about tuning so go easy.
-
86 Zinno es
M50 inside -
get a chip made for the hardware you use
Like ActiveAuto, or find "Matt" here on the r3v1989 cirrisblau-metallic 325i -
But then id have to change that when i went turbo or made more upgrades right?
86 Zinno es
M50 insideComment
-
Right
Comment
-
Miller WAR chip.
/threadsigpic
Turbo Cabrio project: http://eurowerks.org/showthread.php?t=19677Comment
-
If only i had money. Fuckin tunings foiling all my plans for moar powar when im jobless.
86 Zinno es
M50 insideComment
-
it depends how aggressive the change is. if the injectors are only a few CCs off you could get away with it without washing your cyl walls with fuel.
if the cams are going to be super lopey, i don't think so.
You'll get more power if you tune it anyway.'84 318i M10B18 147- Safari Beige
NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
Turbo: 221whp/214ftlbs, MS3x flex @ 17psiComment
-
I know ill get more power, and im doing it eventually either way i just wanted to know if i could get away with it for now. The cams arent too aggressive, im having them reground to m3 specs and the injectors are probably gonna be no more than a few cc's larger.
86 Zinno es
M50 insideComment
Comment