Spark Wires!

[diegom6]

Where can I look for a universal wires and boots that fit the m20 plugs or build your self kit?

Kits are welcome too, but not expensive.!


Low Resistence please! Don't want stock ones.


Thanks!

[DaN]

Good luck man, I tried finding the connectors, but really wasn't successful.
Just save up and buy a new set.

You'll get no power gains with low resistance wires.

[diegom6]

Good luck man, I tried finding the connectors, but really wasn't successful.
Just save up and buy a new set.

You'll get no power gains with low resistance wires.

I will get hotter spark wihc will help the engine alot for my DI system, remeber that at 1 BAR, the turbulence or air pressurised inside the cylinder is high and the spark almost can be ignited!

[kowalski]

hot wires makes a set of wires for them, i have them on my car only because the new engine came with them but they're really expensive last i checked i saw them in a magazine for like 600$ so probably like 400$ or somthing which is still outrageous i can't believe somone bought those anyways good luck. o and btw they're supposed to be good for a 10% power boost which i think is a pile of bull make a hp or 2

[DaN]

Good luck man, I tried finding the connectors, but really wasn't successful.
Just save up and buy a new set.

You'll get no power gains with low resistance wires.

I will get hotter spark wihc will help the engine alot for my DI system, remeber that at 1 BAR, the turbulence or air pressurised inside the cylinder is high and the spark almost can be ignited!

Ah, I neglected to see the turbo part in your sig. MY bad

[diegom6]

Good luck man, I tried finding the connectors, but really wasn't successful.
Just save up and buy a new set.

You'll get no power gains with low resistance wires.

I will get hotter spark wihc will help the engine alot for my DI system, remeber that at 1 BAR, the turbulence or air pressurised inside the cylinder is high and the spark almost can be ignited!

Ah, I neglected to see the turbo part in your sig. MY bad

No prob!

Dam 600$ !??!?!? there such stupid person who will spend that money in a set of wires! my G O D!

[UNHCLL]

600Canadian = $50USD or some stupid bullshit like that.

[DaN]

You can try using the original connectors on the distributor side, get some low resistance wire and some regular connectors. You'll need the little things that screw onto the plug end.

[kowalski]

600Canadian = $50USD or some stupid bullshit like that.

no that was in a US magazine

[JRowe]

Magnecor makes some good wires for e30's. Around $70-80.

[nando]

I got a set of 8mm wires from bavauto, been happy with them so far. they're around $150 and come with everything (impulse sensor, NEW factory loom, etc). You could also go with Ireland Engineering, maybe somebody who has those will chime in.

[Axxe]

600Canadian = $50USD or some stupid bullshit like that.

More like 600 CAD = 550 USD, but it's not american's fault, it's bush's fault :roll:

[diegom6]

Magnecor makes some good wires for e30's. Around $70-80.

where?? :shock:

[mbonder]

i just picked up a set of Ireland Engineerings 8mm performance wires. These are $135 and come with everything, the impulse sensor and new loom just as the bavauto ones do. I'm quite happy with them and would say they are worth the money if you are going with a FI setup.

matt

[JRowe]

Google the magnecors - I did and this is the first and only link you need.

http://www.apexperformance.net/cartgenie/prodList.asp?scat=248