Rear seat back removal

[barry]

Tried a search with no success..

Ok so I'm in the process of taking out my rear back seat and cannot get the back to loosen up. I disconnected all the belt bolts. What do I need to do now.
I also tried to wedge the seat straight up with a 2x4 and nothing budged are there any bolts from the back that need un-doing?
Thanks for your help
Barry

[jlevie]

All the fasteners for the rear seat are on the cabin side. Once all the fasteners have been removed the seat back has to move up to un-hook the catches at the top.

[barry]

Ok got it. Guess I need to stand on the 2x4 210 lbs should move it, right.. LOL

[pogiboy9]

probably not a push and force, after you remove the bolts and such maybe (i haven't pulled out yet) it's push up towards the back window (vertically?) just a guess :P

[Holland]

There are two bolts on the sides with brackets, 10mm I believe. They are back toward the wheel arch. You should see them when the seat bottom is removed. Then lift upward on the seatback.

[barry]

Ok its out, Ya two bolts behind bolster material. Do not have to remove side bolsters.
Thanks
Barry

[Jean]

Early cars (83-84) also have two more bolts holding the lower seat bottom, these face the backs of the front seats.