airbag system gone, turn switch change?

[jhelgesen]

I'm rebuilding a 90is car, no motor, tranny etc. Had lost a few other bits over the years while she sat in a shop parking lot.

So I'm missing the turn signal switch and ignition switch from the car. I'm not putting the airbag wheel back in the car, so can I use the turn signal and ignition switch from the 84 e parts car I have?

Had to add a pic for fun....

[twistednut]

Change out all the stalks. You will be annoyed if you don't.

[jhelgesen]

Turn signal stalk is in, but I've got no flasher. High beam works. No power to obc yet.

[MR 325]

Make sure the switch you put in is from a car with 13 button obc.

[jhelgesen]

thanks, both have the 13 button obc.

[nmlss2006]

Try using the relais from the 90, if you have it. Some people had problems with an early relais in a late car. No, I don't understand why either.

[nando]

84 is prolly too early, but the stalks/switches from my 9/87 parts car worked fine in my 10/90.