If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Recommendations for exhaust, header and LTW flywheel
Since you didn't provide us with any specifics on the engine, or a target price range, I will go as follows:
Stahl headers
Stromung Exhaust
Apex Engineering flywheel.
Info on the car:
87 is, 5spd
2.7 conversion, 2.7 crank, I rods, custom pistons, 10.2:1 compression
Head is ported, big valves, MM springs
cam either 284/272 or 288/288 both Schrick not decided on which one yet, open to suggestions
Intake port matched, extrude honed, 64mm throttle body, big afm
Header, not sure yet
Exhaust, not sure yet
4:10 LSD
Custom chip
Comment