If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anybody know the procedure or have a write up to remove the fuse box? water leak.
Anybody know the procedure or have a write up to remove the fuse box? water leak.
I have a water leak, behind the fuse box. I finally tracked it down. The seam is rotted and water runs right in. To patch it right, I need to remove the fuse box and make room.
I have a water leak, behind the fuse box. I finally tracked it down. The seam is rotted and water runs right in. To patch it right, I need to remove the fuse box and make room.
Bumped because I have a similar problem and was searching for an answer... I don't think I need to remove the whole thing - but I need to remove enough wiring to get it out of the way.
FYI I ended up just popping the wire loom clips off the inside of the fender and unbolting the loom from the firewall to give me some room to lift up the box.
Comment