Announcement

Collapse
No announcement yet.

Where does this go???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Where does this go???

    So I was taking off my cylinder head on my 85 325e and this little guy was in cylinder 4



    Now it is NOT one of the 2 guides for the HG and Cylinder Head and it pretty much fits into any of the cylinder head bolt holes

    What is it for and/or do I need it????

    NOTE: There was never a "Marble in can" sound before I took the head off so this "sleeve" was installed somewhere

    Help!!! I want to get my baby back on the road!!

    #2
    looks like nothing that should be in there. must have fallen in, any numbers or letters on it? is it rubber?
    -FREEDOM- is cruisin at 80, windows down and listening to the perfect song-thinking "this is it"
    -The Beauty in the Tragedy-
    MECHANIC SMASH!!- (you all know you do it)
    Got Drop?? ;-)
    Originally posted by JinormusJ
    But of course
    E30s are know to be notoriously really really really ridiculously good looking

    Comment


      #3
      That looks like a dowel. There are two of those, one towards the front of the engine and one towards the back. There purpose is to correctly align the head with the block. You need both dowels.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment


        #4
        ^ He mentioned in the first post that is was not one of the 2 locating dowels.
        Lorin


        Originally posted by slammin.e28
        The M30 is God's engine.

        Comment


          #5
          it's smaller than the dowels...and it's just like how a dowel would be.

          no numbers, it's metal, it's small...it's annoying me

          Comment


            #6
            Originally posted by LJ851 View Post
            ^ He mentioned in the first post that is was not one of the 2 locating dowels.
            I realize that is what he said, but that is what it looks like. If it was underneath the head and there isn't marks on a piston it would have had to have been being used as a dowel. Will a head bolt fit through it?
            The car makes it possible, but the driver makes it happen.
            Jim Levie, Huntsville, AL

            Comment


              #7
              just checked...A head bolt will NOT fit through

              baffling...

              Comment


                #8
                Doesn't the intake manifold have a centering dowel too?
                Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
                Taylor- Follow me on Instagram @e30_fiend


                Comment


                  #9
                  SOLVED IT!

                  I just recieved another head in the mail and I found that the "Sleeve" is for one of the Timing cover bolts

                  Thanks for all the helps folks!

                  Cheers

                  Comment

                  Working...
                  X