Announcement

Collapse
No announcement yet.

No start - Other issues too

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No start - Other issues too

    So I just replaced my Cylinder Head and HG and finally put everything back together...

    Went to start it up and...nothing, not even a turn over or "click"

    Battery is fully charged, starter is brand new (ran before Head work)

    Other issues -
    - Interior Fan does not work now with key in ACC
    - Lights do not come on with lever pulled

    I hear my fuel pump humming but I am not getting spark

    Where do I start and what are my possibilities? Also, limited access to testers and whatnot

    Thanks

    #2
    Thinking ECU/DME, crank position sensor...am I missing anything else?

    Comment


      #3
      Check voltage, might be too low to run the starter solenoid? You said the lights won't come on.

      Comment


        #4
        The parking lights come on but not main headlights.

        Had jumper cables hooked up, no dice

        Comment


          #5
          The parking lights come on but not main headlights.

          Had jumper cables hooked up, no headlights

          Comment


            #6
            also, is the buzzing coming from the thermostat area caused by my fuel rail being charged?

            Note: This is with the key on

            Comment


              #7
              check your ground.
              Ma che cazzo state dicendo? :|

              Comment


                #8
                I'll check in the engine compartment today...anywhere in particular other than the ground from alternator to engine and the ground that is located by the alternator that attachs to the body?

                Comment


                  #9
                  problem solved! Thanks!

                  Bad ground, just scrubbed and VOILA!

                  Comment

                  Working...
                  X