I was changing my fuel filter so i went to pull the pump fuse #9 ut pulled I think 6 and 7 first(dont ask me why) any way changed my fuel filter but now my OBC displays PPPP I changed it from metric to US and pressed reset but no dice.
-
-
looks like im fucked -
not related.AWD > RWDComment
-
Disconnect and re-connect the negative battery cable then reset the OBC.Originally posted by bastianshaw View PostComment
-
-
There is a very small indented black button on the lower right corner. Use a pencil, press it in, and keep it there for a few seconds.Originally posted by bastianshaw View PostComment
-
had the same problem. did the above ^ and everything works now.Past: 1987 325iS, Bilsteins - HR Sports
Present: 1999 M3, Koni Yellows - HR Sports - GC Camber Plates - UUC Swaybars - UUC SSK - AFE Intake - Stromung Catback
2009 Mazdaspeed3, Short Ram Intake - Turbo Inlet Pipe - 2nd cat Delete - Catback - Fuel Pump Internals - Cobb Accessport - Stratified E30 tune - 294/342 - SPC Camber Arms - CPE Rear Motor MountComment
-
yeah im all good, i thought there was some :other" reset procedure thanksComment
Comment