Front Wheel Bearing

[Vass325es]

How hard to replace the two front wheels bearing. I have trouble finding cheap one. Most range for front wheel bearing from $125 to $168 buck. Anyone know where to find cheap one for my budget and I will need to buy oil pan (Spaz ;-) also.

Thanks!

[schnitzer teil-jäger]

oil pan available. email me i you want it.
w

[HowzeR]

what year model

Whay model/year is your car, I had my front wheel bearings replaced with parts from eap4parts.com

http://www.eap4parts.com/en-us/dept_1127.html

is a direct link, its only like $60 there + shipping. I had the shop do my wheel bearing, wasnt even a hours labor.

[latinobimmer]

its a pain in the ass if you dont have the right tools. save yourself the trouble and get a shop to do it, unless you like being frustrated...my dad and i were for a few hours (both wheels).

[Super Eta]

I have to replace mine also.

I have a parts car but i dont think im going to bother all it does is just make a noise sometimes when i take a right turn i think.

[e9nine]

its a pain in the ass if you dont have the right tools. save yourself the trouble and get a shop to do it, unless you like being frustrated...my dad and i were for a few hours (both wheels).

Wrong. Unless you are referring to the rear. The only tool you "might" need is a puller for the bearing which was moaning since its most likely stuck on the spindle depending on how long you drove the car with the moaning for.

You are better of replacing them in pairs. Its also the best time to do a brake job while you're at it.

[Vass325es]

Pain in ass? I think its should be easy to replace front wheel bearing. If you meant rear bearing.

What the size for front wheel bearing nut?

[Vass325es]

Re: what year model

Whay model/year is your car, I had my front wheel bearings replaced with parts from eap4parts.com

http://www.eap4parts.com/en-us/dept_1127.html

is a direct link, its only like $60 there + shipping. I had the shop do my wheel bearing, wasnt even a hours labor.

1987 325es i6 2.7 2doors

[nando]

Pain in ass? I think its should be easy to replace front wheel bearing. If you meant rear bearing.

What the size for front wheel bearing nut?

32mm