Disabling Wiper Fluid Sensor

[Zinno_e30]

Is there anyway to disable the sensor so that my wiper fluid light indicator does not appear? I deleted to washer reservoir (never use it) and the indicator light annoys the hell out of me.

[csermonet47]

Connect the two wires from the switch. It will be the blue/purple wire and the brown one. It completes the circuit and turns the light off.

[dnguyen1963]

or just take out the bulb.

[smooth]

Connect the two wires from the switch. It will be the blue/purple wire and the brown one. It completes the circuit and turns the light off.

my fuse pops when the circuit is completed and I don't know what to check

[csermonet47]

Make sure you aren't connecting the washer fluid pump wire to something else seeing as washer fluid pump is hot. There are a good bit of wires between the pump and switch. The colors might be different between the years. Mine is a 1991.

[smooth]

Well I am just connecting the fluid sensor so I'm not doing the wrong wires for certain. I also checked the sensor in another member's car to verify it works properly and it does. There's a short somewhere apparently but I don't understand where I should be looking.

[Zinno_e30]

Reviving this from the dead - can anyone verify this? I have an 87.