How do you remove this?

[RawToast]

I've got the Bentley Manual but can't find where / how to remove this (I want to give it some fresh black paint)

[dnguyen1963]

Put the arm down then pop up the black cap. Unscrew the nut and take the arm out.

[RawToast]

Put the arm down then pop up the black cap. Unscrew the nut and take the arm out.

Not the actual arms, I mean the black vent.

[0000000000]

You remove the arms, and slip a flat head and it pops off.

[IRON-E]

You will have to remove the arm as stated, then pry open with a flat head.

Oh and make sure to put a towel under the screw driver for some leverage, if needed and to not mar the surrounding area.

[dnguyen1963]

Take the arm off then you can pry it out with a flat head driver.

[samiam3356]

Bfh

[ForcedFirebird]

Just put "Back to Black" on it and it will look new...

[RawToast]

Woahh! Thanks for all the replys, I got them off and hit them with 4 coats of Plasti-Dip (<- stuff works wonders). I'll post pics when they're done.

[Exodus_2pt0]

flat head

flat head.

flat head driver.

Put down the screwdrivers and step away from the vehicle....

http://www.google.com/products/catalog?q=trim+removal+tool&um=1&ie=UTF-8&tbm=shop&cid=17851110058656349129&sa=X&ei=2P6JT7-lJcfvggevrPHfCQ&ved=0CFgQ8wIwAQ

Or if you're cheap you can find them as singles for a couple bucks. Seriously guys, screwdrivers are not pry tools. (not saying i've never done it, but I would never recommend that)