Announcement

Collapse
No announcement yet.

check panel Oil light help?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    check panel Oil light help?

    i just redid my Oil pan gasket, after it cracked and was welded. so new oil, filter etc. anyways since then my oil light on my check panel comes on. the first two times i pulled over to check for leaks and checked the dipstick all seemed well and when its cold oil is at 3/4 up between low and full. also my Oil pressure light never comes on with this light im kinda stumped

    Edit: oil is Castrol GTX High Mileage 20w-50, Wix oil filter.

    #2
    1) Fill it up to the top line, 2) replace your oil level sender.
    The first car I ever rode in was an e30

    Originally posted by Cabriolet
    Wish you the best and hope you don't remember anything after 10pm.



    1992 Mauritiusblau Vert
    2011 Alpinweiss 335is coupe

    2002 540i/6 Black/Black
    2003 GSX-R 750 (RIP)

    Comment


      #3
      Originally posted by Vivek View Post
      1) Fill it up to the top line, 2) replace your oil level sender.
      this seems to me to be the most logical thing
      Originally posted by evandael
      a car is a car. call it a dildo, i'd still drive the hell out of it.

      Comment


        #4
        you didnt plug the sensor in
        1985 325e M50TU(Sold)
        1991 318is Slicktop (Sold)
        1990 325is Brilliantrot S50/5 Lug Swapped.
        1992 525i Manual shitbox Winter Beater

        Comment


          #5
          lol yea its plugged in

          it does not stay on 100% of the time just often

          also the part/sensor/thing that is mounted inside the Engine block that goes into the oil pan area has been cut since i have had the car so idk if that is causing it also anyone know what im talking about?

          Comment


            #6
            if your talking about your oil level sender, then definitely replace it
            Originally posted by evandael
            a car is a car. call it a dildo, i'd still drive the hell out of it.

            Comment


              #7
              it goes through the block into the pan right? but the light never came on before Except when my oil went low and the oil pressure light came on soon after. thats what is confusing me.

              Comment

              Working...
              X