Announcement

Collapse
No announcement yet.

central locking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    central locking

    My central locking system quit working. I checked the fuses and eveything was ok. i figured the central locking system control unit is bad. Anyone have any ideas what else it might be and if not has anyone changed the control unit before. Just trying to get ideas before i go and rip it out and put a new one in.

    #2
    Out of curiosity, what are the exhibited symptoms?

    Comment


      #3
      Usually when you lock one thing they all lock but now i have lock each lock by its self.

      Comment


        #4
        u have an alarm in there huh, maybe somethin in the alarm is screwing with things.

        Sounds like it could just be the module, not sure on how to further diagnose it.

        kyle
        1988 M3, 97 840, 99 XJ
        DILLIGAF

        Comment


          #5
          Mine went out so I replaced it

          Went out again

          Fuckin Bimmer
          BimmerHeads
          Classic BMW Specialists
          Santa Clarita, CA

          www.BimmerHeads.com

          Comment


            #6
            I have the same symptom where you had to pretty much lock every panel on your own. If it's not wiring then it'll be the control module itself.
            sigpic

            Comment


              #7
              I had that happen to my 318i, ended up being the connector had gotten rusty, so I had to replace it. You can always reset the system by ussing the trunk lock, you have to turn the key to one extreme and then hold it for a few seconds.
              85 325e 2.7 ITB'd stroker

              Comment

              Working...
              X