On my 89' 325i coupe, the RPM needle used to bounce up and down randomly. The car drives fine and idle fines, it passed smog check fine (in CA). So i replaced the fuse in the fusebox that correspond to the cluster, and the needle is going up and down like it suppose to. Though when in idle, the needle sits at 0. When i gas, it will move up. But what's weird is the needle moves very slowly. It never seems to go above 1500 RPM. For example, when i m on 3rd gear going about 40mph, the RPM needle is still only at 1000 RPM or so. At 4th gear 50mph it goes about 1000-1500 RPM. Do i have a bad cluster? What can be wrong?
Hope this makes sense. Thanks.
Hope this makes sense. Thanks.
Comment