If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Cluster odometer works intermittently even after new gears, everything works..
I have this issue but it seems to happen when it is cold out. I replaced the gears and the main circuit so I have narrowed it down to the speedometer/odometer unit itself.
I will have to check to make sure i didn't tighten the screws too tight on the gear cover but I was thinking since it happens in the cold, maybe there is a solder joint that is coming loose in cold weather. Usually it has happened when it is below 40 F. Maybe I should replace the speedometer, but if I do, that will negate the odometer gears that I replaced so I'd rather not do that.
If your speedometer is VDO brand, assume solder joint or solder trace cracks, super common!
Comment