Announcement

Collapse
No announcement yet.

Help! I keep getting ALMOST stranded. Starting issue!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Cleaned everything, put it all back together, still no start. I am still waiting on the CPS. Anything else I could check while I wait for it to get here?

    Comment


      #17
      If the new CPS doesn't fix it, you should check for continuity in the harness from each sensor to ECU. Possible harness issue.
      90 325i DD/Track
      03 Durango 5.9


      Originally posted by e30mpg
      It is recommended to get new gasket but this is R3v and we just copper spray that shit......slap biotch on and tighten to tq.

      Comment


        #18
        Yea, I guess so. That harness is really crunchy. I am honestly afraid of touching it because it falls apart so easily. I will update once I get the sensor.

        Comment


          #19
          I took some pics of the C191, for the most part everything on this car is pretty clean. It has been stored alot, and is shows, both good and bad.

          [/URL]

          [/URL]

          Comment


            #20
            That's pretty clean. Hope the new CPS fixes it, if not it's harness trouble shooting time.
            90 325i DD/Track
            03 Durango 5.9


            Originally posted by e30mpg
            It is recommended to get new gasket but this is R3v and we just copper spray that shit......slap biotch on and tighten to tq.

            Comment


              #21
              SUCCESS!!!!! Just got the new CPS today!! put it in, fired up instantly!! Thanks for all your help and feedback 603 and FLG and everyone else!!!

              Comment


                #22
                Yw.
                90 325i DD/Track
                03 Durango 5.9


                Originally posted by e30mpg
                It is recommended to get new gasket but this is R3v and we just copper spray that shit......slap biotch on and tighten to tq.

                Comment

                Working...
                X