Just picked up an e30. Need some questions answered.
Collapse
X
-
You mentioned a rough spot while turning the wheel. I hate to tell you this but the past three e30's I've rehabbed have need steering column u-joints. Check them before you find out in a turn that they've decided to lock up on you. Not the easiest job but definitely one you want to do. E30's drive terrible after the've been run into a tree or of the road. -
I think your whirring sound...along with random dash lights coming on sounds like alt on the way out.Leave a comment:
-
I'll try this, thanks!
I'd like to call myself mechanically inclined but I'm just lacking the proper tools and shop space. I do have trouble narrowing things down to their origin sometimes, however.if you are not really mechanically inclined enough to diagnose issues on the car i would recommend taking it to a small mom and pop/ small bmw shop and pay an hour or two labor to have the car checked out. But if you can meet a few people locally that drive these cars and know a bunch about them i would get real good friends with them :) good luck!
I'll be taking it in soon. Nothing better than having a fully operational machine.
Sent from my Nexus 5Leave a comment:
-
if you are not really mechanically inclined enough to diagnose issues on the car i would recommend taking it to a small mom and pop/ small bmw shop and pay an hour or two labor to have the car checked out. But if you can meet a few people locally that drive these cars and know a bunch about them i would get real good friends with them :) good luck!Leave a comment:
-
Have you tired simply oiling your passenger lock? Sometimes they get grit in them and don't function correctly. Try some 3-In-1 or tri-flow in the lock. Apply some to the key as well and insert and pull it out several times.Leave a comment:
-
Hah, I'm not sure I'm prepared. I know quite a few guys that go to the same university that daily drive theirs, so I should be able to handle it.
1. Good to know! I'll give my friend a call who has a Bentley manual.1. The head unit and OBC do share a fuse, pick up a Bentley shop manual and reference it for the possible culprit. The manual will become a dear friend as time goes on.
3. The coolant sensor failing is pretty common on these cars, but if all those things started happening at once it sounds more like an electric issue. You can check the ground for the rear lights pretty easily though: remove the rear seat bottom by popping the front edge up on each side, then you should see the ground on the driver's side near the door opening. It'll have a couple brown wires heading to it.
4. Rough idle could be a lot of things, but intake vacuum leaks are the most common cause. Have a shop do a smoke test to look for leaks and go from there.
3. Apparently they were both just replaced. PO worked at a Volkswagen dealership in the service department, he never printed his own receipts. I should ask him to. I'll look into the rear lights as well.
4. I'll probably be taking it into a shop (some great BMW shops up here in Bellingham, I've heard) to get a tune up and general inspection soon. Good running engine + less chance of failure = peace of mind.
Thanks again!Leave a comment:
-
1. The head unit and OBC do share a fuse, pick up a Bentley shop manual and reference it for the possible culprit. The manual will become a dear friend as time goes on.I've run into a few other issues that have arisen in the first two days of owning the vehicle:
1) Head unit and OBC have lost power (fuse?)
2) Tachometer went out... now I must get my SI board fixed.
3) Random check lights are coming on/going off including coolant, oil, rear lights. Stomp test = 1444 = no faults.
4) It feels like it's idling rough, but I don't have anything to compare it to but newish cars. Also since tach is out, can't really tell what it's doing.
Other things:
The shift knob doesn't like to stay on, it comes off on almost every 1-2 upshift, and the seats are very broken.
3. The coolant sensor failing is pretty common on these cars, but if all those things started happening at once it sounds more like an electric issue. You can check the ground for the rear lights pretty easily though: remove the rear seat bottom by popping the front edge up on each side, then you should see the ground on the driver's side near the door opening. It'll have a couple brown wires heading to it.
4. Rough idle could be a lot of things, but intake vacuum leaks are the most common cause. Have a shop do a smoke test to look for leaks and go from there.Leave a comment:
-
-
It is a BMW knob. The clip probably just broke, my friend was taking it for a drive and shifted a little too aggressively after trying successfully to get it sideways. He didn't listen to me telling him not to :/.
Sent from my Nexus 5Leave a comment:
-
Do you have a BMW knob? If so, when you put it on, you have to put pressure on it til it clicks in place. if this isn't the issue, then the tab inside might be broken and you need a new knobLeave a comment:
-
I've run into a few other issues that have arisen in the first two days of owning the vehicle:
1) Head unit and OBC have lost power (fuse?)
2) Tachometer went out... now I must get my SI board fixed.
3) Random check lights are coming on/going off including coolant, oil, rear lights. Stomp test = 1444 = no faults.
4) It feels like it's idling rough, but I don't have anything to compare it to but newish cars. Also since tach is out, can't really tell what it's doing.
Other things:
The shift knob doesn't like to stay on, it comes off on almost every 1-2 upshift, and the seats are very broken.
Any comforting words for the worried first timer? My decision to give up a (borrowed from my dad) perfectly working 2006 Saab 9-5 for this is starting to concern me.Leave a comment:
-
That would be awesome! PM sent.
Thanks for the tip. This scares me slightly as I don't have a proper set of tools or the shop space to do a timing belt job myself. I'm sure it could be done, but it might not turn out well.This would worry me. While there are a lot of things it could be, one of those things is a failing timing belt tensioner. And that will result in a lot of damage if it goes completely.
Start by removing all the front belts, and running the car (cold, for a short time)
to see if it's one of them. If it's not, shut the car off, and replace the timing belt and
tensioner, because a few hours now will save you days (and $$$) later.
hth
tLeave a comment:
-
This would worry me. While there are a lot of things it could be, one of those things is a failing timing belt tensioner. And that will result in a lot of damage if it goes completely.2) There is a whirring noise coming from the front of the engine bay. It sounds like some sort of bad bearing, maybe something to do with the fan or fan clutch or an accessory belt. It doesn't overheat. There is also a squeal at about 5k rpm in neutral.
Start by removing all the front belts, and running the car (cold, for a short time)
to see if it's one of them. If it's not, shut the car off, and replace the timing belt and
tensioner, because a few hours now will save you days (and $$$) later.
hth
tLeave a comment:
-
^ best security I've ever seen! As a side note, the rebuild kit for the passenger side in a car with central locking is special-order only from Germany. I happen to have one I could sell if you didn't want to wait.Leave a comment:


Leave a comment: