Just picked up an e30. Need some questions answered.
Collapse
X
-
Thanks for the tip! I've also noticed a slight clunk in the steering when turning right. There's a spot that requires just a little bit of extra force just after initial turn in.congrats on the new car. I'll only answer #3 because it's easy.
The wheel is held on with a single 22mm nut. Yes you can swap it, or just adjust the wheel accordingly. it's easy to get the splines messed up if you aren't thinking about it. Also, when you go to take the wheel off, loosen the nut, then loosen the wheel. After the wheel is loose, take the nut off. Otherwise you might lose some front teeth. ;)
I've actually been able to turn the lock slightly while doing exactly this, but not actually open the lock.
I'll probably end up getting myself a rebuild kit and do that over the next couple weeks. Any advice on lubrication with the door closed and door panel intact?
Sent from my Nexus 5Leave a comment:
-
If you're having trouble opening the passenger door, you can get it open by applying light pressure to the key in the "unlock" direction and pulling the handle. To fix the problem completely, you'll need to rebuild the lock cylinder and/or lubricate the latch mechanism.Leave a comment:
-
congrats on the new car. I'll only answer #3 because it's easy.
The wheel is held on with a single 22mm nut. Yes you can swap it, or just adjust the wheel accordingly. it's easy to get the splines messed up if you aren't thinking about it. Also, when you go to take the wheel off, loosen the nut, then loosen the wheel. After the wheel is loose, take the nut off. Otherwise you might lose some front teeth. ;)Leave a comment:
-
Just picked up an e30. Need some questions answered.
So I just picked up this 88 325iS with a 5 lug swap. I've got a few questions that some of you can probably answer.
1) The passenger door lock has seized. I can turn it 45 degrees to the left and the central locking system activates. I cannot turn it to the right. The door is stuck shut. Advice?
2) There is a whirring noise coming from the front of the engine bay. It sounds like some sort of bad bearing, maybe something to do with the fan or fan clutch or an accessory belt. It doesn't overheat. There is also a squeal at about 5k rpm in neutral.
3) The steering wheel is crooked on center. Can this be fixed, or can I replace the wheel with a three spoke M steering wheel?
Thanks for any advice, here are some pictures of my beautiful new (to me) machine!
Sent from my Nexus 5Tags: None

Leave a comment: