looking for a diy before doing this so I can save time and do it correctly the first time through. Anyone have a detailed diy? thanks
Announcement
Collapse
No announcement yet.
throttle cable install diy / M42
Collapse
X
-
Well, a Haynes manual would tell you to remove the cable, and that installation is reverse of removal.
The truth is that you remove the cable from the TB with some twisting to pass the end retainer through, then disconnect it from the pedal assy. Pull the cable through from the engine bay, and really do the reverse to reinstall.
-
Originally posted by NitroRustlerDriver View PostThe hardest part is getting to the plastic clip that is in the firewall. You have to squeeze it with pliers so it compresses and will then fit through the hole. Look at your new cable and it will make more sense.
so, long skinny needle-nose pliers?
Comment
Comment