Just wanted to let yall know that an OEM fit parallel flow condensor exists for the e30. I have seen several threads here and at the other forums trying to fit a parallel flow from something else but that isnt really needed. I broke my tube/fin condensor taking it out for my 24v swap so I got on worldpac and ordered up this one. I got it at cost (90 bucks) but the list on worldpac is 400+. In other words I suggest trying to shop it around unless you have a worldpac account. If you have carquest nearby then you can order through them since they own/use worldpac. Anyway I used this condensor (bolts right up) with custom lines (e30 lines with e36 m52 compressor fittings), the m52 oem compressor, oem evap, and recently changed drier. I didnt change the expansion valve. Put in 900 grams of 134a. Here are the pics. Puts down serious icecubes. The pic of the pyrometer is at idle after idleing the car for about 45 mins so underhood temps were scorching. Fan speed 2. The ambient was probably around 80f.
Oh and I just found it on rockauto for 75 bucks. https://www.rockauto.com/dbphp/x,cat...-PRO_6590.html
Oh and I just found it on rockauto for 75 bucks. https://www.rockauto.com/dbphp/x,cat...-PRO_6590.html
Comment