Does anyone know if an e28 528e getrag 265 tranny will work corectly with my eta? :?:
-
-
different output flange.
You want a Getrag 260 out of a 325e/i
Josh on this board is selling a 260 from a 325iS. -
The i tranny's will not work, as the i tranny's do not have the crank reference sensor holes. only 87' e and pre 87' 260's will work. I was just not sure if the 265 would bolt up?
Output flanges are also interchangeable with the correct 30mm thin-walled socket. thanks for the info about the tranny FS though.Comment
-
The marking for the sensors are there.... you just need to drill them. The bellhousing is soft aluminum, it isnt hard to drill.Originally posted by Red325esComment
-
Oops............I should have kept a good used tranny then, and had a machine shop drill it out. Oh well. time to find a new tranny. Has anyone ever delt with the euro depot?Comment
-
Euro Depot is owned by Joel, used to be friends with him back when I lived in NH.
Joel is good people, won't do you wrong.Comment
-
awesome thanks for all the help! :DComment
-
265 are for the US M3's to. They have a removable bell housing. So if you could attach the proper housing then yes it would fit.
however you are better off just getting a G260 a bolting it up.Comment
Comment