Help Identifying a Part-pic of Loom for Engine Harness

[CurrusDei]

I want to replace this part but can't find it on any of the regular parts sites. Not sure if its M3 specific, but it's the black rubber funnel shaped piece. It connects to a rubber conduit that guides the wiring harness under the intake manifold (which has dry rotted off). Any help identifying it would be helpful!


Sent from my iPhone using Tapatalk

[jlevie]

I don't think that part is available separately from the engine harness. Nor to I see how it could be replaced without disassembling the harness.

[CurrusDei]

I'm anticipating having to detatch the lines forward of the firewall to run them through the conduit. I haven't seen a wiring harness with this on it.


Sent from my iPhone using Tapatalk

[vpilarrt]

M42's have a similar boot, don't knoiw if's the same one or not. Possibly could be made to fit your M3. There are several 318is's being parted out here.

[TobyB]

That looks similar to what the E36 M42 cars do...

t