Gas/Temp Gauge Ground Nut Missing

[ccarlozz]

As the title states I am missing the ground nut that goes on the back of the temp gauge and the gas gauge on the back of the instrument cluster. I pulled the cluster because the temp and gas gauge were jumping all over the place.

Anyway does anyone know what size nut goes on the ground? I figure I can run to Home Depot and get it if I know the size...

Thanks.

[mr.vang]

I have couple of them laying around in the bin. Pm me

[mitchlikesbikes]

just bust into ace hardware with your cluster and test them out. i think they are the same as the ones on the taillights as far as thread pitch but the tail ones have a built in washer.

also go to ace, not home depot. ace's metric selection is infinitely easier to sort through and they have a way better selection

[AndrewBird]

RealOEM.com might list the size.

[Gregs///M]

7mm

[ccarlozz]

7mm

Yup, picked some up this afternoon. Fixed my issue. Thanks all.

[boxy30]

Just for documentation, I had a missing ground nut on my temp gauge and replaced it this weekend with an M4x0.7 hex nut. 7mm is the socket size for the nut.