Fuel hose replacement

[Codym42]

I'm replacing my fuel filter and thought it would be a good time to replace all the rubber fuel hoses at the back of the car while I'm there. I'm a little confused as to what I should buy. Do I just buy 8x13mm fuel hose and cut to fit? I know there are four different hoses at the back on my 318is. Realoem lists this one for the fuel filter outlet. http://www.turnermotorsport.com/p-71...-bmw-part.aspx

I'm just wondering if that is the only special hose and if everything else is cut to fit using standard hose? What have you guys done?

Also, I found this thread which shows pics of all four hoses. http://www.bimmerfest.com/forums/sho...d.php?t=527253

Just want to be sure I know what I'm doing before I start ordering hoses.
Thanks!

[vpilarrt]

You can also use 5/16" ID hose. Whatever hose you get make sure its rated for fuel injection (high pressure) applications.

[jeffnhiscars]

You can get a 10m roll of 8mm x 13mm FI rated hose for about $30 online. That enough to do 2 engine compartments plus some misc.

#14 is a tight bend and only about $5 so is worth buying. I've used std hose for it In a pinch and it can work as well.

http://www.realoem.com/bmw/enUS/showparts?id=BB23-USA-07-1987-E30-BMW-325i&diagId=16_0181