Exhaust heat shield ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • grlaneriejr
    Grease Monkey
    • Oct 2003
    • 321

    #1

    Exhaust heat shield ???

    What would happen if I took off the heat sheild that is on the pipe between my cat. converter and the muffler? Will I fry anything?

    This thing rattles like crazy on my car, sounds like it's about to fall apart when I start it.
  • 86325e
    Wrencher
    • Oct 2003
    • 228

    #2
    My first E30 I bought didn't have it on it. Guess it was rattling and someone took it off. I never had any problems with it not being there.
    Eric
    85 325e M50 and auto to manual transmission conversion...

    Comment

    • Saul325is
      E30 Modder
      • Dec 2003
      • 819

      #3
      Re: Exhaust heat shield ???

      Originally posted by grlaneriejr
      What would happen if I took off the heat sheild that is on the pipe between my cat. converter and the muffler? Will I fry anything?

      This thing rattles like crazy on my car, sounds like it's about to fall apart when I start it.
      Yeah same thing happend to me, they only come on some aftermarket cat's. I took some metal cutters and cut the heat shield off of the cat converter, and the rattling stopped. I dont think it does any harm, because it doesnt get hot to the point where it could melt through your chasis.

      -Saul
      Saul
      01 330ci Daily Driver
      89 332is Auto-x Friend
      95 M3 *SOLD*
      87 325is *SOLD*

      Comment

      • grlaneriejr
        Grease Monkey
        • Oct 2003
        • 321

        #4
        okay guys, thanks for the info

        Comment

        • Jordan
          R3V OG
          • Oct 2003
          • 12907

          #5
          You are talking about the big long sheet metal heatshield that goes between the exhuast system and the driveshaft right?

          Removing should have no ill effects other then what aerodynamic purpose it likely serves as well.
          Tenured Automotive Service Professional - Avid BMW Enthusiast

          Vapor Honing & E30 ABS Pump Refurbishment Service
          https://mtechniqueabs.com/

          Comment

          • 86325e
            Wrencher
            • Oct 2003
            • 228

            #6
            Jordan, Thats what I was talking about.
            Eric
            85 325e M50 and auto to manual transmission conversion...

            Comment

            • DaN
              E30 Fanatic
              • Dec 2003
              • 1265

              #7
              You could try gettin some hose clamps on it, or somehow bending it tighter so it doesn't rattle.
              Or throw it in the trash

              Comment

              • 318daily
                E30 Addict
                • Nov 2003
                • 507

                #8
                I'm pretty sure you can do without it. I know the Mad Scientist RedBaron doesn't have one. It would also make inspecting your driveshaft a much easier job.

                Comment

                • Bill 84 318i
                  E30 Mastermind
                  • Oct 2003
                  • 1600

                  #9
                  Originally posted by Jordan
                  Removing should have no ill effects other then what aerodynamic purpose it likely serves as well.
                  I would think that is pretty negligible on a street car...or maybe even a track car (unless you go balls to the wall, in which case you'd have something blocking air from getting under the car anyway). The heatshields are crimped on so tight to the cat and pipe that they can't possibly do that much in terms of aerodynamics.

                  So people that run straight pipes are sacrificing a legit amount in terms of aerodynamics?

                  Comment

                  • UNHCLL
                    R3V OG
                    • Oct 2003
                    • 8789

                    #10
                    Originally posted by Bill 84 318i
                    So people that run straight pipes are sacrificing a legit amount in terms of aerodynamics?
                    Jordan is refering to the heat shield attached to the underside of the car. Between the center section and the driveline. Not the individual heatshielding wrapped around the catalytic converters.
                    Below the radar...

                    Comment

                    • Bill 84 318i
                      E30 Mastermind
                      • Oct 2003
                      • 1600

                      #11
                      Originally posted by UNHCLL
                      Originally posted by Bill 84 318i
                      So people that run straight pipes are sacrificing a legit amount in terms of aerodynamics?
                      Jordan is refering to the heat shield attached to the underside of the car. Between the center section and the driveline. Not the individual heatshielding wrapped around the catalytic converters.
                      Oh, whoops. Yeah, your driveshaft would get banged up purty good too.

                      Comment

                      • Jordan
                        R3V OG
                        • Oct 2003
                        • 12907

                        #12
                        This (just happened to clean mine today and take a picture)

                        Tenured Automotive Service Professional - Avid BMW Enthusiast

                        Vapor Honing & E30 ABS Pump Refurbishment Service
                        https://mtechniqueabs.com/

                        Comment

                        • Bill 84 318i
                          E30 Mastermind
                          • Oct 2003
                          • 1600

                          #13
                          Holy OCD.

                          Comment

                          • Jordan
                            R3V OG
                            • Oct 2003
                            • 12907

                            #14
                            OCD?
                            Tenured Automotive Service Professional - Avid BMW Enthusiast

                            Vapor Honing & E30 ABS Pump Refurbishment Service
                            https://mtechniqueabs.com/

                            Comment

                            • DaN
                              E30 Fanatic
                              • Dec 2003
                              • 1265

                              #15
                              :shock: Obsessive Compulsive Disorder

                              Comment

                              Working...