Announcement

Collapse
No announcement yet.

Driveshaft question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Driveshaft question

    How much adjustment is there in the driveshafts, in other words how much longer can you make them if you loosen that nut in the middle and sperate the two halfs?

    #2
    Not much, like an inch or so, why? Oh and if you are going to unscrew that piece may i suggest buying a new one.
    Yours truly,
    Rich
    sigpic
    Originally posted by Rigmaster
    you kids get off my lawn.....

    Comment


      #3
      dam I was hoping for three inches. So I should replace that nut? I need to split the shaft anyways to install a new center bearing.

      Comment


        #4
        He's probably refering to the plastic sleeve under the nut.
        I dont see a reason to replace it unless its destroyed.

        Make sure you mark the splines before you split the drive shaft, its balanced as one.

        Comment


          #5
          BMW NA recommends you replace it every time. It is a crush bushing and can be mis-shapen when torqued down. The part is like 12 bucks with a new nut. Just do it.
          Yours truly,
          Rich
          sigpic
          Originally posted by Rigmaster
          you kids get off my lawn.....

          Comment

          Working...
          X