clutch setup for 220-240hp?

[Skafrog]

it's not the clutch, its the pressure plate you need to worry about. The stock pressure plate for an m20 is too weak. just get an e30 m3 clutch kit.

[SA E30]

I run a stock Sachs Clutch on my car with Ally flywheel... only slips when it gets hot after hammering it... otherwise it's fine.

Then I dont track the car that much... or drag it that much either.

[erik325i]

just get an e30 m3 clutch kit.

Will you need to also get an m3 flywheel? or does the m3 clutch work with the m20 flywheel?

-Erik

[e304me]

^ bump

[blueapplesoda]

Will you need to also get an m3 flywheel? or does the m3 clutch work with the m20 flywheel?

-Erik

i need to know aswell.

[e304me]

come on people

[e304me]

according to realoem the clutch sizes between the 325 and m3 are both 228mm. I may just order an m3 PP since i already have a m20 disk? (and the m3 disk is 200)