Announcement

Collapse
No announcement yet.

Fluids

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fluids

    I know there's a million threads on this but I see different answers on each one. I have an 89 325 lsd and manual trans which oil should I use in each? Is 75w90 in the diff and 75w80 in the trans ok?

    #2
    Go with the Bentley recommendation when in doubt.

    Comment


      #3
      Those are both fine. BMW now recommends 75w-140 for the diff, to reduce noise and increase life, but the 75w-90 is fine. You could also use 75w-90 in the gearbox (a la MT-90) without any issues. People have found smoother shifting going both ways. I currently use redline MTL 75w-80 in the gearbox and redline 75w-140 LSD oil in my diff.
      Interested in vintage cars? Ever thought about racing one? Info, photos, videos, and more can be found at www.michaelsvintageracing.com!

      Elva Courier build thread here!

      Comment


        #4
        That's interesting on the diff oil... going to look into a 75w140... but I wonder how that would be up here in the cold???

        Right now I use Redline MT-90 in the tranny and the 75w90NS in the diff.
        Estoguy
        1986 BMW 325, Alpenweiss ~ "Elsa"

        Need a photographer, come visit my site: http://estoguy.wix.com/unique-perspectives

        Comment


          #5
          75-140 is too heavy for a year round gear oil In Canada so I'd stick w 75-90.

          There are 3 different fluid specs for a manual. Different stickers, no sticker....not completely sure but one uses atf, I used mtl in mine etc etc.
          Last edited by jeffnhiscars; 04-07-2016, 01:02 AM.
          Seat Shocks....I have passed the baton to John Christy from Ninestitch. Email John or Garrett at ninestitch1@gmail.com

          https://www.r3vlimited.com/board/sho...86#post4944786
          Alice the Time Capsule
          http://www.r3vlimited.com/board/showthread.php?t=360504
          87 Zinno Cabrio barn find 98k and still smells like a barn. Build thread http://www.r3vlimited.com/board/show...20#post3455220

          Comment


            #6
            Again it's all a matter of personal preference, but I'd read a post from someone involved with the G260 that the sticker/type of fluid didn't have any real bearing on what HAD to be used. My gearbox is "supposed" to use MT90; I used it for two years with no issues, and now I've used MTL for two years with no issues. Gearbox shifts great and makes no noise. YMMV
            Interested in vintage cars? Ever thought about racing one? Info, photos, videos, and more can be found at www.michaelsvintageracing.com!

            Elva Courier build thread here!

            Comment


              #7
              Originally posted by ELVA164 View Post
              Again it's all a matter of personal preference, but I'd read a post from someone involved with the G260 that the sticker/type of fluid didn't have any real bearing on what HAD to be used. My gearbox is "supposed" to use MT90; I used it for two years with no issues, and now I've used MTL for two years with no issues. Gearbox shifts great and makes no noise. YMMV
              Thanks Jeff... I was thinking that it would be too thick up here.

              Elva is right... the labels indicated what the factory fill was - there were two types of oil and ATF used, depending on whether there was no label, a green one or an orange/red one. If you completely drain the tranny, you can refill with whatever.

              I've been running MT-90 for 3 years in mine, no problems, gearbox shifts great.

              When I did my diff seals while doing my rear subframe refresh, honestly, the oil looked new. No debris or anything. Redline is expensive, but it hasn't done me wrong.
              Estoguy
              1986 BMW 325, Alpenweiss ~ "Elsa"

              Need a photographer, come visit my site: http://estoguy.wix.com/unique-perspectives

              Comment

              Working...
              X