euro headlamps wiring

[Spaz]

alright guys i just picked up a pair of euro smilies for a greta price of 110 shipped :) and they are MINT! but i have one problem, wiring, i just wondering how you guys wired them in. i have a 1990 with sealed beams, and also i was wondering where you wired your city lights into.

thanks alot.

btw i tried search, lots of discussions, but no one actually told how to wire them up.

[OOMPH!]

I have 2 articles because I bought smoked Hellas from Michaels Groupbuy and I am waiting in anticipation....... :twisted: I got these articles from members of this site :up:

http://www4.ncsu.edu/~fsdomura/fogon.html

http://thurbers.net/tim/frontfogs.html

[nando]

uh, both those links are for foglights.. not euro ellipsoids. big difference!

I still need the part #'s for the euro connectors. :(

[Spaz]

uh, both those links are for foglights.. not euro ellipsoids. big difference!

I still need the part #'s for the euro connectors. :(

lol yah we need headlamps :P

[James Crivellone]

uh, both those links are for foglights.. not euro ellipsoids. big difference!

I still need the part #'s for the euro connectors. :(

just go the stealer and have him grab a bucket of connectors, that is how I got mine =)

[OOMPH!]

uh, both those links are for foglights.. not euro ellipsoids. big difference!

I still need the part #'s for the euro connectors. :(

WOOPS, :oops: it was late when I posted that.........I'll make it up to you guys........
http://www.e30m3therealm3.com/tech/ee.html that should work

[boricuabimma']

http://www.archercc.net/tech/lighting.htm

he has an article on how install euro ellipsoids and how to work with the relays and that stuff, that helped me a lot.

Good Luck with your new headlights, and post images as soon as you install them ;)

[KenC]

http://www.archercc.net/tech/lighting.htm

he has an article on how install euro ellipsoids and how to work with the relays and that stuff, that helped me a lot.

Good Luck with your new headlights, and post images as soon as you install them ;)

Ryan's tech articles comin' through again :woowoo:

[boricuabimma']

what did I did wrong?? :roll:




anyhow :wgaf:

8)

[nando]

uh, both those links are for foglights.. not euro ellipsoids. big difference!

I still need the part #'s for the euro connectors. :(

just go the stealer and have him grab a bucket of connectors, that is how I got mine =)

yeah I'll just walk down to the dealer.. oh wait it's like 150 miles away! doh! ;)

[Ryan Stewart]

I think you are confused boruca, he is agreeing with you.

Guys you will want to order the high beam larts listed on e30m3therealm3 if you want to have the sealed high beams. On the low beams all you really need are the pins in the plug from your old sealed beams. I think they are 61131353440 and if you want to replace the old brittle plugs (I broke one) thye are 61131352234
Mike's kits should all come with the plug adapters in my writeup.

[boricuabimma']

hehe it's boricua, ryan ;)

Well Ken, I'm sowwy

[nando]

I think you are confused boruca, he is agreeing with you.

Guys you will want to order the high beam larts listed on e30m3therealm3 if you want to have the sealed high beams. On the low beams all you really need are the pins in the plug from your old sealed beams. I think they are 61131353440 and if you want to replace the old brittle plugs (I broke one) thye are 61131352234
Mike's kits should all come with the plug adapters in my writeup.

the problem is that one of those numbers is bad and there are 3 connectors :)

[Ryan Stewart]

Both work in my ETK and two of the pins you leave alone. The low beam wiring and gorund dont need to be rewired, you are just moving the high beam wire out and replacing it with the citylight hot wire. YOu dont need the ground because it just shares the ground with the low beam.

[nando]

yeah you still need 3 plugs! I can handle the wiring. I can't use paper clips to connect the wires into the caps, right? :rofl: