E39 electrochomatic mirror retrofit

[PDXPeter]

I didn't think this would be complicated but I can't find the wiring diagram anywhere. Ive got a mirror with PN 015313 and it has 5 wires coming out.

- Blue / Yellow
- Brown / Black (most likely ground)
- Red / Black
- Green / White
- Gray / Black / with Yellow dots (dashes?)

Can anyone tell me which wire does what?

[htseng]

Mirror wiring 51160001231
Pin 8&9 clown nose
Pin 3 12v switched power. Yellow
Pin 10 ground brown

Not sure if this helps. I installed a bmw 5 series homelink mirror in my vert.




Sent from my iPhone using Tapatalk

[PDXPeter]

Thanks! Do you happen to know the colors of each pin? I dont have the connector, just cut wires.

[PDXPeter]

NM, figured it out.

Blue / Yellow - Reverse
Brown / Black - Ground
Red / Black - Clown Nose LED
Green / White - 12v
Gray / Black / Yellow - Clown Nose LED

[htseng]

My connections to check panel. Green white to purple white and brown black to brown


Sent from my iPhone using Tapatalk

[PDXPeter]

Thank you again! I was looking at those wires as well. Not sure I feel like running all the others up and around just yet.

[Mike36]

Sweet, I just think about doing this!