I can not get the overhead check panel lite to clear the brake lite test . 88’ M3 is what I’m working on . I’ve got (2) other e30s so I know how it should work . 21w & 18w for third lite . What is my problem ?? I’ve swapped out check panel , swapped out the check control panel relay in trunk .
M3 check panel brake lite won’t go out !
Collapse
X
-
My issue was with the 3rd brake light module, i took the rear shelf tray out, and looked at the reed switches that are in the housing, and just soldered a new wire to connect the broken section.
Having the brake light on was driving me crazy but that did the trick for me. -
I've fixed a few of these. The check panel has several transistors which trigger the LED indicators on and off. These transistors fail over the 30 years and cause them to be stuck on or off. Same thing happens to the SI board, indicators get stuck on with key off, killing vehicle battery.Owner - Bavarian Restoration
BMW and European Electronics Repair and Restoration
www.BavRest.com
My Feedback Thread
Our Facebook!
Follow our Instagram!
Comment

Comment