I want better cornering and whatnot, but don't want to go too low, as I have to drive this in the winter. I was thinking m3 springs, but they are rated for a 4 cyl obv, so I'm not sure about those. Just wondering if there was something with a .75"-1" drop I could get instead?
Announcement
Collapse
No announcement yet.
What springs for 325 1" drop
Collapse
X
-
Many people put M3 springs on 325's and the handling is fine. You can pick up a used set for under $100, definately worth a shot. They are rated around 100f/300r lbs/in. and lower the car about an inch."I'd probably take the E30 M3 in this case just because I love that little car, and how tanky that inline 6 is." - thecj
85 323i M TECH 1 S52 - ALPINEWEISS/SCHWARZE
88 M3 - LACHSSILBER/SCHWARZE
89 M3 - ALPINEWEISS II/M TECH CLOTH-ALCANTARA
91 M TECHNIC CABRIO TURBO - MACAOBLAU/M TECH CLOTH-LEATHER
Comment
-
Originally posted by reelizmproMany people put M3 springs on 325's and the handling is fine. You can pick up a used set for under $100, definately worth a shot. They are rated around 100f/300r lbs/in. and lower the car about an inch.Erick Mahle | FullOpp Drift | YouTube
EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control
..::Support FullOpp::..
FullOpp Stickers for sale!
NEW | Enthusiast Apparel T-Shirts! | NEW
Feedback Thread
Originally posted by Mr. Anderson...one of the most hardcore E30's around. :D
Comment
-
Originally posted by ColdAccorddaN got the bavauto springs, and his car is slllaammeed now. 2.5 degrees of negative camber. want something a little more managable than thatTenured Automotive Service Professional - Avid BMW Enthusiast
Vapor Honing & E30 ABS Pump Refurbishment Service
https://mtechniqueabs.com/
Comment
Comment