Announcement

Collapse
No announcement yet.

i swap no windshield wipers HELP!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    i swap no windshield wipers HELP!

    so i did an motor swap for a 325es automatic, and i put a 325is manual motor in it and now my windshield wipers do not work, what wire do i need to splice to the c101 car side?
    Last edited by Jesse-e30; 10-15-2007, 06:52 PM. Reason: because i messed up what i wrote

    #2
    Somebody correct me if I am wrong but the wipers should have nothing to do with the motor swap. If you used an 87 325i or is wiring harness it should have all been plug and play anyway.
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com

    Comment


      #3
      Yeah, the engine harness has no wiper input. Probably blew a fuse or relay, or bumped something while doing the swap.
      85 325e m60b44 6 speed / 89 535i
      e30 restoration and V8 swap
      24 Hours of Lemons e30 build

      Comment


        #4
        there is that big black relay in the fuse box that control the wipers check and see if it is dead

        Comment


          #5
          so i replaced the fuse and relay and it is still not working

          Comment


            #6
            Start tracing the circuit with a meter or test light.
            The car makes it possible, but the driver makes it happen.
            Jim Levie, Huntsville, AL

            Comment


              #7
              Do you have power to the fuse or the relay?
              Go Pioneers!

              Keith

              Comment

              Working...
              X